CUSTOMIZE

F8 Home Theater

Luxurious Antique Hi-Fi Home Theater System

Available: Out of stock

Default configurations are bi-pole/di-pole surround speakers. Customerization is also available.

8" Woofer 6.5" Midbass 1.1" Dome Tweeter Isodynamic Ribbon Tweeter
CUSTOMIZE

Select a Configuration:

FINISH:

PRODUCT STORY

F-Antique series features luxurious antique look and superb sound reproduction. It’s a perfect combination of retro appearance and modern cutting-edge electroacoustic technology. You can enjoy your speakers with surround sound setups from a simple 2.1 to 7.2 or even 11.2 theater systems. (Image below is a 7.2 system)

Product Image

Front Speakers

Solid wood cabinet is finished with natural walnut veneer. The internal enhancing structure reduces cabinet resonance and coloration to a small extent. Each speaker weighs as much as 207lbs. 4th-way 4th-order vented box system consists of 5 premium drivers: swan’s typical isodynamic ribbon tweeter, 1.1″ soft dome tweeter made of natural fiber, 6.5″ midbass driver featuring Kevlar bulletproof fiber and two 8″ long-throw woofers.

Product Image

Acoustically Acute Design

With three smaller drivers mounted together in the middle -upper part of the woofer, a small area sound source is formed, which improves directivity of the system. 8″ woofer can respond to frequencies all the way down to 40Hz. The combination of ribbon tweeter and dome tweeter enable the system to cover higher frequencies even up to 40 kHz, when the ribbon tweeter focuses on frequencies higher than 15 kHz.

Product Image
Product Image

D'Appolito Array

Center speaker adopts MTM array of drivers, consisting of two 6.5″ midbass drivers, a 1.1″ dome tweeter and an isodynamic ribbon tweeter which are consistent with the front speakers.

Different Surround Stereo Sound Setups

Two choices are available for surround speakers: bi-pole/di-pole surround speaker F10R and mono-pole surround speaker F10M.

F10R features two 6.5″ midbass drivers, two 1.1″ domes tweeters and two isodynamic ribbon tweeters while F10M only features one set of the above drivers.

F10M is mainly used in a 9.2 or 11.2 system, in which it is used for directivity. It can also be used as hi-fi bookshelf speakers for its high performance in sound reproduction.

 

 

Product Image
Product Image
Sample

SPECIFICATIONS

Front Speakers

System Type 4-way 4th-order vented box system
Drivers Configuration 15” woofer; 6.5” midrange driver; 1.1” dome tweeter; isodynamic ribbon tweeter
Frequency Range 30Hz - 20kHz
Harmonic Distortion 56Hz - 20kHz ≤1%(2.83V/1m)
Sensitivity (2.83V/1m) 89dB
Nominal Impedance
Power Handling 10W - 500W
Dimension (W×D×H) 27.3" x 20.1" x 48.0"
Net Weight(each) 264.6lbs

Center Speaker

System Type 3-way 4th-order vented box system
Drivers Configuration 6.5” midbass×2; 1.1” dome tweeter; isodynamic ribbon tweeter
Frequency Range 60Hz - 20kHz
Harmonic Distortion 60Hz - 20kHz ≤1%(2.83V/1m)
Sensitivity 90dB (2.83V/1m)
Nominal Impedance
Power Handling 10W - 150W
Dimension (W×D×H) 23.3" x 11.2" x 11.3"
Net Weight(each) 50.7lbs

Surround Speakers

System Type Selected bi-pole/di-pole surround speakers
Drivers Configuration 6.5” midbass×2; 1.1” dome tweeter×2; isodynamic ribbon tweeter×2
Frequency Range 70Hz - 20kHz
Harmonic Distortion 65Hz - 20kHz ≤1%(2.83V/1m)
Sensitivity 88dB (2.83V/1m)
Nominal Impedance
Power Handling 10W - 120W
Dimension (W×D×H) 25.7" x 13.3" x 11.5"
Net Weight(each) 47.4lbs

Subwoofer

System Type Powered 1-way sealed box system
Drivers Configuration 15" woofer
Frequency Range 26Hz - 120Hz (DIRECT); 26Hz - 80Hz (INTERNAL X-OVER)
Rated Power 1000W
Signal-to-Noise >100dB (Unweigthed)
Input Sensitivity 100mV
Input Impedance 22kΩ
Dimension (W×D×H) 21.3" x 18.3" x 24.8"
Net Weight(each) 121.3lbs

YOU RECENTLY VIEWED

You have not viewed any products yet. View our collections:

Home Theater

High Fidelity Stereo

Multimedia

Smart Speakers